10mm roller bearing detail

10mm roller bearing rely on rolling contact between the main parts to support the rotating parts.Different 10mm roller bearing can bear different radial and axial forces.When selecting roller bearings, the selection should be made according to the specific working conditions.
Main features of 10mm roller bearing：
(1) similar to the aligning ball bearing, the outer raceway of the 10mm roller bearing is a part of the sphere, and its curvature center is on the axis of the bearing. The outer raceway of this type of 10mm roller bearing is spherical, so its aligning performance is good and it can compensate the coaxiality error, so it can realize automatic centering.
(2) in the section perpendicular to the rolling direction, the roller bus is a curve, which is well consistent with the inside and outside raceway. The roller and raceway are in line contact, which can bear radial load and axial load and have a good impact resistance.
(3) the rollers of the 10mm roller bearing have a high anastomosis with the raceway and are all curved bus bars, so the relative slip is serious and the friction is larger than that of the cylindrical roller bearing, so the operating speed allowed by the aligning roller bearing is lower.
(4) of ordinary roller bearings with asymmetric type roller, operation will produce axial force component, a roller and the function of the component and contact center fixed guard, symmetrical roller of 10mm roller bearing, it employs the activity can move along the axial middle ring, this roller is no longer bound by center guard, and leaves out the inner ring raceway relief groove, longer roller can be used, so as to improve the bearing capacity of bearing.
If you need 10mm roller bearing or need any other bearings, please also contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271