3mm id bearing different application

3mm id bearing is belong to micro bearing.Micro deep groove ball bearings refer to metric series with outer diameter less than 9mm;Inch series bearings with outer diameter less than 9.525mm, mainly made of carbon steel, bearing steel, stainless steel, plastic, ceramic, etc.
In ultra small aperture in the miniature bearing, 3mm id bearing miniature deep groove ball bearing type has the metric 68 series, 69 series, 60 series, etc., inch on a total of 6 R series.
The main purpose for 3mm id bearing:

3mm id bearings suitable for all kinds of industrial equipment, small rotary motor of high speed low noise field, such as: office equipment, micro motor, instrument, laser engraving, small clock, soft drive, pressure rotor, dental drill, drive motor, stepping motor, VCR magnetic drum, toy models, computer cooling fan, paper, fax machine, and so on related areas.
Matters needing attention when heating miniature 3mm id bearing:

1. Place the yoke iron on the end face of the main engine.
2. Insert the plug into the power socket with control switch.
3. Check whether the grounding wire is good and test it with the test pencil after electrification.
4. Press the start button to power the host machine.
5. Check that the yoke iron shall have no voltage to the ground.
6. Press the stop button to turn off the power and stop heating.
7, according to different specifications of miniature bearings or other workpieces, choose different yoke iron sleeve, the yoke iron on the top surface of the host, should be anastomosed flat.
8. When heating the miniature 3mm id bearing, insert the sensor into the "sensing socket" and press the sensor against the heated workpiece.
Jinan Maolei Bearing Co.,Ltd.,is 3mm id bearing manufacturer in china,our 3mm id bearing is high quality and high precision bearing.If you need 3mm id bearing or need any other bearings, please also contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271