5202 2rs bearing can withstand both radial and axial loads

5202 2rs bearing can withstand both radial and axial loads simultaneously. Can work at higher speeds. The larger the contact angle, the higher the axial load-bearing capacity. High precision and high-speed 5202 2rs bearing typically have a contact angle of 15 degrees. Under the action of axial force, the contact angle will increase.
5202 2rs bearing capable of withstanding large radial loads, mainly combined radial and axial loads, as well as torque loads, to limit the axial displacement of the shaft in both directions.

The tilting ability between the inner and outer rings of double row angular contact ball bearing 5202 2rs bearing, which are mainly used to limit the bidirectional axial displacement of the shaft and housing, is limited. The allowable tilting angle depends on the internal clearance, bearing size, internal design, and the forces and moments acting on the bearing.

The maximum allowable tilting angle should ensure that no excessive additional stress is generated inside the 5202 2rs bearing bearing. If there is a tilt angle between the inner and outer rings of the bearing, it will affect the service life of the bearing, and cause a decrease in the operating accuracy of the bearing and an increase in operating noise.
Double row angular contact ball bearing 5202 2rs bearing generally use nylon retainers or brass solid retainers. When installing double row angular contact ball bearing 5202 2rs bearing, it should be noted that although the bearing can withstand bidirectional axial loads, if there is a gap for installing the ball on one side, care should be taken not to let the main axial load pass through the groove edge on the side with the gap.
If you need 5202 bearing or need any other bearings, please feel free to contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271