We are 5mm rod end bearing manufacturer

We are 5mm rod end bearing manufacturer in china,there have some detail for 5mm rod end bearings information for your reference:
Rod end joint bearing vibration is sensitive to damage, such as peeling, indentation, rust, crack and wear will be reflected in the rod end joint bearing vibration measurement, therefore, through the use of special rod end joint bearing vibration tester (frequency analyzer, etc.) can measure the size of the vibration, through frequency points cannot deduce the abnormal situation.The measured values are different due to the operating conditions of the rod end joint bearing or the installation position of the sensor, so it is necessary to analyze and compare the measured values of each machine before determining the judgment criteria.
The temperature of 5mm rod end bearing, generally have rod end joint bearing outdoor surface temperature can be inferred, if the oil hole can be directly measured 5mm rod end bearing outer ring temperature, more appropriate.Generally, the temperature of the rod end joint bearing slowly rises with the running of the rod end joint bearing and reaches a stable state after 1-2 hours.
The normal temperature of the 5mm rod end bearing varies with the heat capacity, heat loss, speed and load of the machine.If the lubrication and installation parts are suitable, the bearing temperature of the bar end joint will rise rapidly and abnormal high temperature will occur. At this time, the operation must be stopped and necessary preventive measures shall be taken.The heat sensor can be used to monitor the working temperature of the 5mm rod end bearing at any time, and realize the automatic alarm or stop to prevent shaft accident when the temperature exceeds the specified value.
If you need 5mm rod end bearing or need any other bearings, please also contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271