6002 2rs is a deep groove ball bearing with sealing rings on both sides

The 6002 2rs is a deep groove ball bearing with sealing rings on both sides.
Introduction of 6002 2rs:
1. The 6002 2rs bearing is a deep groove ball bearing
2. With sealing rings on both sides
3. With dust cover, 6002 2rs
Size parameters
D: 15 mm
D: 32 mm
B: 9 mm
Technical parameters for 6002 2rs bearing:
The rated load
Cr: 5.6 kN
Cor: 2.83 kN
Limit speed :2200 RPM

The processing form of deep groove ball bearing parts is as follows:
1. Multi-process processing: General bearing production needs 20~40 processes, with more than 70.
2. Molding: The working surface of bearing parts is rotary forming surface, which is suitable for molding.
Pay attention to the problem
Deep groove ball bearing, running bearing load is too small, will make the ball and raceway between sliding, become the cause of scratches.In particular, large deep groove ball bearings with heavy balls and retainers have this tendency.
There are many reasons for the corrosion of 6002 2rs bearings. The most common factors in our daily life are as follows.

1) Due to poor sealing device, it is invaded by moisture and dirt;
2) The bearings are not used for a long time and lack of maintenance after the rust-proof period.
3) Large metal surface roughness;
4) Contact with corrosive chemical media, bearing cleaning is not clean, the surface is stained with dirt, or contact the bearing with sweaty hands, after cleaning, the bearing is not packaged or installed in time, long-term exposure to the air, air moisture invasion and contamination;
5) Ambient temperature and humidity and contact with various environmental media;Failure of anti-rust agent or non-compliance with quality requirements.
If you need 6002 2rs bearing or need any other bearings, please also contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271