6406 2rs bearing is mounted on the shaft

After the 6406 2rs bearing is mounted on the shaft, the axial displacement in both directions of the shaft or the housing can be limited within the axial clearance range of the bearing, so it can be axially positioned in both directions.
In addition, this kind of bearing also has a certain self-aligning ability. When the bearing is tilted 2 '~10' relative to the shell hole, it can still work normally, but it has a certain influence on the bearing life.Deep groove ball bearing 6406 2rs cages are mostly steel sheet stamping wave cages, and large bearing cages are mostly vehicle metal solid cages.

Deep groove ball bearings 6406 2rs are the most commonly used rolling bearings.6406 2rs bearing structure is simple and easy to use.Mainly used to bear radial load, but when the radial clearance of the bearing is increased, it has the performance of a certain angular contact ball bearing, and can bear radial and axial combined load.
When the speed is high and the thrust ball bearing is not suitable, it can also be used to bear pure axial load.Compared with other types of bearings with the same specification and size as deep groove ball bearings, this kind of bearings has small friction coefficient and high limit speed.But not impact resistance, not suitable for heavy load.

Deep groove ball bearing 6406 2rs generally use steel plate stamping cages or brass solid cages.When the outside diameter is less than 400 mm, the steel plate stamping cage is used without the rear designation. When the outside diameter is greater than 400 mm, the brass solid cage is used without the rear designation.
If you need 6406 2rs bearing or need any other bearings, please feel free to contact me or send email to nsk@zyslbearing.com!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271