How to Installation and maintenance bearing 6300 2rs?

Bearing 6300 2rs in leather processing equipment, electromagnetic sucker, wire peeler, water cooler, manual welding machine, gas stove, forging machine, garbage truck, pneumatic pump, sand making machine, plastic machine, grain processing equipment, electrolytic cell, Roland printing machine, medical, desulfurization machine, auxiliary machine of plastic machine, rock drilling machine, etc.

First, the bearing 6300 2rs installation and disassembly must be cautious.

Different types and sizes of thin walls have different installation methods and tools, including mechanical or hydraulic. Here is mainly to explain some general basic installation methods and precautions.

1.don't install the ball hardly, which will lead to local overload of the ball and the contact surface, leading to premature failure of the bearing.

2. don't use hard tools, such as hammers and screwdrivers, to beat the surface of the bearing, which will break or brittle the outer ring of the bearing 6300 2rs.

Second, the bearing 6300 2rs cleaning

A clean environment is very important for bearing 6300 2rs. The surface roughness accuracy of the rotating surface and rolling elements of the thin-walled deep groove ball bearing ring is about 1/10 μm, so if the smooth ball surface is polluted, its influence will be very serious. The lubricating layer between the rolling surfaces is usually 0.2~1 μm, and the granular impurities larger than the particle size of the lubricant will be excessively crushed by the rolling elements, resulting in local pressure in the self-aligning roller bearing steel, which will eventually lead to permanent material fatigue. In addition to this, the size of dust particles in the external environment can reach 10 μm, which will also cause damage to the self-aligning roller bearing. Because of this, a clean and tidy working environment is very important for bearings.

Third, the bearing 6300 2rs process testing

In the process of use, the bearing 6300 2rs working temperature of the induction bearing is heated up, and if the temperature is found to exceed the specified limit, it will automatically give an alarm to prevent shaft burning. High temperature often indicates that the bearing is in an abnormal condition. High temperature is also harmful tobearing 6300 2rs lubricant. Sometimes the overheating of thin-walled deep groove ball bearings can be attributed to the lubricant of the bearings. If the bearing 6300 2rs is connected for a long time at a temperature exceeding 125℃, the bearing life will be reduced. The causes of high temperature bearing include: insufficient lubrication of bearing, unqualified lubricant, impurities in it, insufficient clearance inside bearing and friction caused by oil seal when the load is too large, and so on.

If you need any brand bearings or any models of bearings, please contact me!

Contact: Bella
Email: skf@llhbearing.com
TEL/Skype/wechat:+8615318805907
Whatsapp: +8615315596312