Characteristics of full ceramic fishing reel bearings

Full ceramic fishing reel bearings are located throughout both spinning and baitcasting reels wherever there are components that must spin/rotate. The spool, pinion gear and under drag washers, They serve to facilitate the rotation of gears, knobs, spools and even level wind devices.

Characteristics of full ceramic fishing reel bearings. While the one-way bearing of the fishing wheel has the priority of the one-way needle roller bearing, it must also have the characteristics that are possessed during the use of fishing gear.

1. Rotation should be flexible. The requirement for the bearings to rotate flexibly is to reduce resistance during the rotation of the fishing wheel, reduce wear on the bearings and other accessories, and to make the fishing wheel more flexible when retracting and releasing the line, so that customers can feel more comfortable during fishing.

2. The torque should be large. The high torque is simply to avoid the repair rate of the fishing wheel and can be adjusted to fish with larger weight.

3. Anti-rust. Rotating high-end fishing reels have been made of stainless steel, which can ensure the normal use of the fishing reel whether it is sea water or fresh water.

Technical requirements for fishing gear bearings in fishing reels
1. The starting torque is small. Ensure that the fishing reel rotates easily and flexibly, and the fishing line can be thrown far.
2. The rotation is smooth and there is no sandy feeling. Ensure that the fishing reel will not jump when rotating and the line will not be messed up.
3. Resistant to salt spray corrosion. Fishing reels, especially those used for sea fishing, have to work on the sea for a long time and are inevitably exposed to salt spray. There is a problem of resistance to salt spray corrosion. It is not only about appearance and long service life, but also it is required to be able to last for a long time. Keep the starting torque small and the rotation stable.
4. The end face of the bearing inner ring is more than 0.15 mm higher than the dust cover plane. Mainly refers to the gear rod bearing in the fishing reel. There is a multi-head worm with a large helix angle on the gear rod. It has a large axial force during rotation. Due to the existence of internal axial clearance in the bearing, it may cause rotation. The parts on the shaft collide with the dust cover, causing rotational interference, causing the transfer to be blocked. To prevent such undesirable phenomena from occurring, it is necessary to ensure that the end face of the bearing inner ring is higher than the plane of the dust cover.

If you need any brand or any models bearings , please contact me!

Contact: Grace
Email: ntn@llhbearing.com
Skype:+8618668903871
MP/Whatsapp: 008618668903871
Wechat:GraceXu1234