Home > News > Industry News > Notice when use low profile linear bearing

Notice when use low profile linear bearing

142 Published by admin Jun 19,2024

1.Pay attention when use low profile linear bearing
~Prevent rusting
When directly taking the low profile linear bearing by hand, it is necessary to thoroughly wash the sweat on the hands and apply high-quality mineral oil before operation. Especially pay attention to rust prevention during the rainy season and summer.
~Keep the environment clean
Keep the linear guide rail and its surrounding environment clean, even if small invisible dust enters the guide rail, it will increase the wear, vibration, and noise of the guide rail.
~Installation should be done carefully and carefully
Linear guide rails should be used and installed carefully, and strong stamping is not allowed. It is not allowed to directly hit the guide rails with a hammer, and pressure transmission through rolling elements is not allowed.
~The installation tools should be suitable
Use appropriate and accurate installation tools for linear guides, and try to use specialized tools to avoid using fabrics and short fibers.

Clean low profile linear bearing
During the operation of the equipment, a large amount of corrosive dust and smoke are generated during the processing of the processed parts. These smoke and dust accumulate on the surface of low profile linear bearing for a long time, which has a significant impact on the machining accuracy of the equipment and can form corrosion points on the surface of the guide rail linear shaft, shortening the service life of the equipment. In order to ensure the normal and stable operation of the machine and the processing quality of the product, it is necessary to carefully carry out daily maintenance of the guide rail and linear shaft. Attention: Please prepare a dry cotton cloth and lubricating oil for cleaning the guide rail. Cleaning of linear guide rail: First, move the laser head to the far right (or left), find the linear guide rail, wipe it with a dry cotton cloth until it is bright and dust-free, and then add a little lubricating oil (sewing machine oil can be used, do not use engine oil). Slowly push the laser head left and right a few times to evenly distribute the lubricating oil.