Method of mini cooper rear wheel bearing replacement

Hub bearing and mini cooper rear wheel bearing replacement is an important part of the vehicle driving system. Its role is to carry the body and provide accurate guidance for the rotation of the hub.At present, the hub bearing has developed to the third generation, among which the highest technical requirements for maintenance personnel is the first generation.This is because the inner ring and outer ring of the bearing are connected with the relevant parts through interference fit. Special tools mini cooper rear wheel bearing replacement press them into the corresponding parts during installation.This is some method of mini cooper rear wheel bearing replacement for your reference:

Mini cooper rear wheel bearing replacement 1,Disengaging knuckle

2,Secondly, remove the old hub bearing
(1)remove the brake disc, sensor and other accessories from the steering knuckle.
(2) use a special tool to push the hub out of the knuckle.For general general maintenance enterprises, it is likely that there is no special tool, in this case can use the appropriate size of the sleeve instead.Since the inner ring of the hub bearing is connected with the hub through interference fit, when the hub is removed, the inner ring of the bearing will fall off with the hub.

(3) use a puller to remove the inner ring of the hub bearing from the hub.
(4) use circlip pliers to remove circlip springs for locating bearings from both sides of bearing seat holes on the steering knuckle.
Mini cooper rear wheel bearing replacement 3,Press in the new hub bearing
Mini cooper rear wheel bearing replacement 4,Install and reset the knuckle and other relevant parts
If you want to know more method of mini cooper rear wheel bearing replacement or need any other bearings, please also send email to me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271