Home > News > Industry News > How to clean one direction bearing

How to clean one direction bearing

1,447 Published by admin Jun 13,2018

One direction bearing is one that rotates freely in one direction and is secured within the different.Unidirectional bearings are known as overrunning clutch, however ar named per completely different|completely different} industries and different functions.One-way white metal shell, contains variety of roller, needle or ball, and also the rolling (hole) of the form that it will solely scroll in one direction, whereas in another direction can manufacture terribly huge resistance (the alleged "one-way").
Entity unidirectional bearing used GCr15 bearing steel, when heat treatment hardness in HRC61-65, bearing tiny volume and high bearing capability, have enough space for storing of the grease, however have long return lubrication interval.
One direction bearing is one that rotates freely in one direction and is secured within the different.One-way white metal shell, contains variety of roller, needle or ball, and also the rolling (hole) of the form that it will solely scroll in one direction, whereas in another direction can have an excellent resistance.

How to clean and check one direction bearing?
1. When the one direction bearing is dismantled and inspected, the appearance record shall be recorded first.
2. In addition, confess the amount of residual lubricant and sample the lubricant before cleaning the bearing.

one direction bearing China supplier
3. Washing of bearings is divided into rough washing and fine washing, and a metal grid can be placed at the bottom of the used container.
A. When rough washing, remove the grease or sticky material with a brush or the like at the oil level. If the bearing is changed in the oil at this time, be careful that the rolling surface may be damaged due to foreign matter.
B. When fine-washing, gradually change the bearing in the oil and it must be done carefully.
4. The general-purpose cleaning agent is neutral, non-aqueous diesel or kerosene, and it is sometimes used with a mild alkaline solution. Regardless of the type of cleaning agent used, it should always be filtered and kept clean.
5. After cleaning, apply anti-rust oil or anti-rust grease immediately on the one-way bearing.