Home > News > Industry News > Do you reall know about engineering plastic sleeve bushing?

Do you reall know about engineering plastic sleeve bushing?

566 Published by admin May 26,2020

We can provide customers with widely used and high-quality engineering plastic sleeve bushing. All engineering plastic materials have been optimized and meet the technical requirements in various fields. The materials for manufacturing sliding bearing series products are mixed in a certain proportion by adding a certain amount of reinforcing fibers and grease to the base material. Thermoplastic materials can be processed together with grease, by adding fibers, especially those with improved friction and wear resistance to increase strength. The stamid® series of sliding bearings comply with DIN 1494 / ISO 3547 standards.

The basic composition of stamid® series plastic sleeve bushing material:

Matrix material-determines the wear resistance of the material
Reinforced fibers and fillers-increase bearing strength so that bearings can withstand greater pressure
Solid grease-to make bearings have self-lubricating characteristics, reduce friction

Advantages of stamid® series plastic sleeve bushing:Maintenance-free,Vibration absorption,Low noise operation,No corrosion,Cost advantage,High chemical resistance,Resistant to dust and dirt

Conventional stamid® plastic sleeve bushing series materials


stamid® ST101 plastic sleeve bushing series	stamid® ST102 plastic sleeve bushing series	stamid® ST103 plastic sleeve bushing series	stamid® ST104 plastic sleeve bushing series
* High cost performance * High pressure resistance * Maintenance free	Good chemical resistance Suitable for flexible shaft *Good water absorption	* Low friction * Adapt to flexible shaft * Excellent wear resistance	* Withstand edge pressure * Excellent shock absorption * Anti-impact

Material Performance Table	stamid® ST101	stamid® ST102	stamid® ST103	stamid® ST104
Density(g/cm3)	1.49	1.45	1.27	1.14
Colour	Black	Yellow	Yellow	Carbon black
The water absorption at 23 ℃, 50%(Weight%)	0.5	0.3	1.1	1.5
Max water absorption(Weight%)	4	1.2	7	8
Elastic Modulus(Mpa)	9300	3500	4100	3100
Max allowable surface static pressure (20 ℃)(Mpa)	80	35	55	30
Tensile strength at 20 ℃(Mpa)	145	60	80	80
Max temperature (continuous operation)(℃)	135	90	85	85
Max temperature (short-term) (℃)	200	110	85	85
Lowest temperature(℃)	-40	-40	-40	-40
Thermal conductivity(W/m x K)	0.25	0.25	0.2	0.25
Coefficient of dynamic friction for steel shafts	0.08-0.15	0.06-0.18	0.05-0.20	0.10-0.30
Max rotational speed(m/s)	1	1.5	1	1