How to cleaning skatedboard ball bearings?

How to cleaning skatedboard ball bearings?
The cleaning of sliding plate bearings is very simple, get the bearing down from the plate, wipe off the oil and stains on the bearing with paper towels, wipe off the inner wall of the wheel, and change the wheel around and around is good for the patency of the bearing.  About once a week, the high temperature generated by the rotation of the bearing when the plate is used, the glue of the wheel and the bearing wall are close to each other, resulting in the inconvenient change of the wheel or the bearing, so it is often necessary to remove the bearing from the wheel and load it on. In order to avoid trouble, the bearing can be cleaned at the same time.  

Skatedboard ball bearings oiling  
Remember to put oil after cleaning, a wide range of oil, the oil can, but someone said that the buy back the bearing first bubble in the gasoline for a week, so that quite a waste of gasoline, buy back, to clean the oil in a week after it doesn't matter, just bought back the bearing lubricating oil, is stored in order to prevent rusty oil skatedboard ball bearings, can send oil to use board in the skatedboard ball bearings,  When cleaning, remove the oil used for the first time, and oil, the oil does not play a lubrication role, simply like the measuring cylinder can not be heated only to take the liquid role, only to prevent rust, but often used plate bearings rust is difficult.  

If you need skatedboard ball bearings or need any other bearings, please feel free to contact me to get more detail,we are skatedboard ball bearings manufacturer in china for many years.
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271