Different types Stainless Steel Ball Bearings for Sale

Different types Stainless Steel Ball Bearings for Sale

Compared with ordinary bearings,stainless steel ball bearings for sale not only have obvious advantages in material, but also have much stricter control in technology and accuracy. Stainless steel bearings work stably, have low noise, are corrosion-resistant, and are widely used during the working process.
  Compared with ordinary bearing steel, stainless steel bearings have stronger rust and corrosion resistance. By selecting appropriate lubricants, dust covers, etc., they can be used in environments ranging from -60 ℃ to+300 ℃. Stainless steel deep groove ball bearings can resist corrosion caused by moisture and several other media. This type of single row deep groove ball bearing, like standard deep groove ball bearings made of carbon chromium (rolling bearing) steel, has a very deep bearing raceway groove, and the fit between the bearing raceway and the ball is extremely high. Stainless steel bearings are widely used in food processing, medical equipment, and pharmaceutical machinery due to their high mechanical strength and large load capacity.

Advantage of Stainless Steel Ball Bearings for Sale
1. Excellent corrosion resistance: Stainless steel bearings are not easy to rust and have strong corrosion resistance.
2. Washable: Stainless steel bearings do not require re lubrication to prevent rusting.
3. It can run in liquids.
4. Slow depletion rate: AISI 316 stainless steel does not require oil or grease corrosion protection. Therefore, if the speed and load are low, lubrication is not necessary.
5. Hygiene: Stainless steel is naturally clean and does not corrode.
6. High heat resistance: Stainless steel bearings are equipped with high-temperature polymer cages, which can operate in a higher temperature range of 180 ° F to 1000 ° F.

The main reasons for the fracture and failure of stainless steel bearings are defects and overload. When the external load exceeds the material strength limit and causes part fracture, it is called overload fracture. The main cause of overload is sudden failure or improper installation of the host. Defects such as micro cracks, shrinkage holes, bubbles, large foreign objects, overheated tissues, and local burns in bearing parts can also cause fracture at the defect site during impact overload or severe vibration, which is called defect fracture.

If you need any brand or any models bearings , please contact me!

Contact: April
Email: nsk@llhbearing.com
Skype/Wechat:April15315593063
MP/Whatsapp: 008615315593063